The bottom half of my freezer sits so low it's not reachable. So I decided to reduce the size of my freezer by inserting 1" foam insulation covered by a 1/2" starboard layer. Fill the dead space.
i cut around the thermostat
i put two quarters in between the cut boards so i could get plenty of adhesive in there.
Next i put adhesive onto the wall attaching sides and placed the board in place.
Now I'm letting it dry for 24 hrs before i turn it back on. With this new bottom installed I'll be cooling about a 50% smaller area. I cant wait to see how much better it works.
REPORT: it's running great
and holding temperature.
(the next afternoon)
2 comments:
You now have created a hiding place for your money.
Cold cash...except now everyone knows it so that will be first place to look..sorry.
Doug; you jackass. now you've ruined it. I'll have to go cut it up and get all those bundles of $100's back out and hide them somewhere else....
Post a Comment